long boot - Page 2

blackd3ath · #21 (**permalink**) 09-25-2008, 11:48 AM

it said this afternoon after shutting down and restarting that the system had recovered from a serious error:: BCCode : ea BCP1 : 88B8F338 BCP2 : 89B76550 BCP3 : 88195330
BCP4 : 00000001 OSVer : 5_1_2600 SP : 3_0 Product : 768_1

technical info

C:\DOCUME~1\******~1\LOCALS~1\Temp\WER4819.dir00\M ini092408-01.dmp
C:\DOCUME~1\******~1\LOCALS~1\Temp\WER4819.dir00\s ysdata.xml

what does that mean, and could that have any thing to do with what ever this is thats is plaging my pc?

MFord66215 · #22 (**permalink**) 09-25-2008, 02:02 PM

This link seems to indicate that a display driver went bluey...your mileage may vary.

ialmrnt display driver error

blackd3ath · #23 (**permalink**) 09-25-2008, 04:44 PM

well what is wrong? and this is the first time. could it be related to my mother board or my original problem?

blackd3ath · #24 (**permalink**) 09-26-2008, 11:37 AM

im unshure if this is the same error as before BCCode : 100000ea BCP1 : 898E0538 BCP2 : 88868AF8 BCP3 : BACEBCBC
BCP4 : 00000001 OSVer : 5_1_2600 SP : 3_0 Product : 768_1

C:\DOCUME~1\******~1\LOCALS~1\Temp\WERb5a1.dir00\M ini092608-01.dmp
C:\DOCUME~1\******~1\LOCALS~1\Temp\WERb5a1.dir00\s ysdata.xml

also i was looking at a diffrent post and thought that it might be my fsb being set two high?

suprnova74 · #25 (**permalink**) 09-26-2008, 07:22 PM

That also seems to reference display drivers. I would either upgrade or downgrade your display drivers.

blackd3ath · #26 (**permalink**) 09-27-2008, 07:32 PM

well i just upped to 178 from 177 but haven't shut down for a long amount of time. so well just have to wait and see

blackd3ath · #27 (**permalink**) 09-28-2008, 03:40 PM

well it did it again to day, but i wiggled the power supply cable and it worked. i think its the power supply, but is there anyway to test it without swaping out the power supply?

MFord66215 · #28 (**permalink**) 09-28-2008, 07:06 PM

There's supposed to be testers, but I haven't used anything more complicated than a voltmeter in years...if we question the part - out it goes.

blackd3ath · #29 (**permalink**) 09-28-2008, 07:30 PM

well ill try swaping with a friend, and see if i still have the problem, he has same motherboard as i so id be weird if i didnt have problems with his ps and he doesnt with mine? thad b weird

blackd3ath · #30 (**permalink**) 10-06-2008, 01:13 PM

well my CTA teacher told me that it could posibly be my ram, mobo, or ps. he told me a couple things to try and i did. one was to remove the ram and then turn the system on and see if it just tries to restart, it does. then add one stick at a time. i did that and with one stick it gave me trouble but the other didnt.

i dont seem to have the problem of it not posting or anything for that matter, if i unplug the power connector that goes into the ps from the wall.

it has a friend wondered if it was the surge protector that could be causing this problem, could it? i pluged a diffrent powercable into the wall(its a thiner cable, if thats good or bad tell me 750w ps) and it booted right up.

it crashed a couple times and i dont remember what the bsod said, but it did say dumping physical memory(does it do that all the time?)

also i put my new card(9800gtx+) in early last week, could that be helping my problem become worse?

maby next weekend ill try and swap parts with a friend adn see if he has problems and if i still do.

(woot 100 posts)

**Sirrobin4ever** · #31 (**permalink**) 10-06-2008, 01:59 PM

Could definitely be the RAM. One of the sticks works, while the other gives you trouble? Am I reading that right? Does it work fine with just the one that doesn't give you trouble?

blackd3ath · #32 (**permalink**) 10-06-2008, 02:43 PM

it works fine with both, but i had trouble trying to boot with the 2nd stick. but idk if it was. ill try that test again and rite it down so i dont forget. aslo ill try a friends RAM and see if i have problems with his.

**Tark** · #33 (**permalink**) 10-06-2008, 03:09 PM

did you run memtest86+?

beerandcandy · #34 (**permalink**) 10-06-2008, 03:21 PM

if you can get the Mini092608-01.dmp file i can show you how to read it to see whats in it.

blackd3ath · #35 (**permalink**) 10-06-2008, 03:58 PM

i burnt memtest86+, but it wont boot into it
and whats the Mini092608-01.dmp file?

beerandcandy · #36 (**permalink**) 10-07-2008, 10:55 PM

its the file that has the information in it that shows why the os crashed
if you reproduce the issue and get a new *.dmp file it should show who was on the stack when the failure occured
but either way it sounds like you have over clocked the system and it isnt stable or you overheated something

**JumpingJack** · #37 (**permalink**) 10-08-2008, 12:04 AM

Everyone is offering up good suggestions ... during post a lot of things happen --

Voltages get set, drives spin up and report ready, and initializations take place.

In order --
- HD not spinning up fast enough and holding back the initialization (HD problem)
- PSU flaky, 12 VDC line may be being pulled down.
- Memory not seated
- Sticky power button (this caused me problems once).
- If you have an nVidia card -- it may be their problematic bonding problem causing the issue

... it starts happening after several power cycles and one symptom is failure to initialize.

Jack

blackd3ath · #38 (**permalink**) 10-09-2008, 11:19 AM

would a bios update posibly help? if not with the start problem, then with my board reconizing correctly?